|
Electric Motor
In rotating motors, bearings are critical components; their performance and service life directly affect the motor¡¯s performance and service life. Improving bearing performance and service quality is essential to ensuring the stable and reliable operation of the motor. Classification of Motor Bearings The rolling bearings commonly used in motors include deep groove ball bearings, angular contact ball bearings, cylindrical roller bearings and self-aligning roller bearings. Small motors generally use deep groove ball bearings at both ends; some also use angular contact ball bearings; Medium-sized motors generally use roller bearings at the load end and ball bearings at the non-load end; Large motors generally use self-aligning roller bearings. Performance Requirements for Motor Bearings The primary operational requirements for motor bearings are the absence of abnormal noise, low vibration, low noise, low temperature rise and long service life. The absence of abnormal noise primarily requires that no unusual sounds caused by sliding friction occur during bearing operation. This is usually determined by listening for abnormal sounds other than electromagnetic noise and fan noise during no-load operation after installation. Vibration and noise are the most critical requirements for bearings; the vibration values of the entire unit must comply with factory specifications after installation. Lubrication of Motor Bearings Motor bearings are generally lubricated with grease or oil, with a very small proportion using self-lubrication. In most general-purpose motors, sealed grease-lubricated bearings are widely used. |
